8 Wire IP 67 Pin Type Load Cell For 2t/6.5t/12t Weighing Applications-WL-162-TEDS
Product Description:
The WL-162 load pin is intended for use in cranes, winches, hoists, load shackles, and bearing blocks. With a load range of 2t/6, 5t/12t, the WL-162 load cell makes precise and instantaneous load force monitoring possible. Our load pins are crafted from high-tensile 17-4PH stainless steel, subjected to rigorous testing up to 150% of typical rated loads. Additionally, our load pin has TEDS memory built in to hold calibration data for plug-and-play transmitters and sensors. The host controller can download this data as needed.
Brans are always devoted to deliver satisfied and favourable services to each our clients to meet their specific needs. We deeply understand that each apllication is different and requires a customized response.
To make sure providing the best solution, the dimensions can be specified or modified to meet a particular application requirement.
Features and Applications:
- Integral signal conditioning
- Environmentally Sealed to IP67
- The loading direction is opposite to aviation on plug
- Good resistance to corrosion and other chemicals
- Good long-term sustainability and stability
- Spins male connector on load cell
- 17-4PH stainless steel with 8 wiring
Specifications:
| Capacity | 2t/6.5t/12t |
| Rated output | 1.0±20%mV/V |
| Hysteresis | 0.5%F.S. |
| Zero balance | ±0.03mV/V |
| Non-linearity | ±1%F.S. |
| Ceep(30min) | 0.5%F.S. |
| Temp.effect on output | ±0.5%F.S./10℃ |
| Temp.effect on zero | ±0.5%F.S./10℃ |
| Imput impedance | 780±20Ω |
| Output impedance | 700±5Ω |
| Insulation | ≥5000MΩ/100VDC |
| Recommended excitation | 5-12VDC |
| Compensated temp. range | -10~60℃ |
| Operation temp. range | -20~80℃ |
| Safe overload | 150%F.S. |
| Ultimate overload | 400%F.S. |
| IP class | IP67(Customizable) |
| Cable size | Optional |
| Material | Stainless steel |
Dimension(MM):
Load Direction&Wiring:
Load Cell Packaging and Shipping
To ensure safe arrival at your location, the load cell will be carefully packaged and shipped. The packing process is as follows:
1. The load cell will be placed in a sturdy cardboard box to protect it from external damage during shipping.
2. The box will be filled with foam padding to provide additional cushioning and prevent the load cell from moving during shipping.
3. The load cell will be sealed in a plastic bag to protect it from moisture and other environmental factors.
4. Additional layers of bubble wrap will be provided for additional protection.
5. The carton is securely taped to prevent tampering.
6. A shipping label with your address and product information is attached to the box.
7. The package is shipped using a reliable and trusted freight carrier.
Once the package is shipped, you will receive a tracking number to monitor the status of your delivery. Please ensure that someone is available at the delivery address to receive the package to avoid any delays or problems.
Product Tags:
|
|
8 Wire Load Cell IP67 Pin Type Load Cell 12 Tonne Load Cell Images
|
